Chevrolet Silverado Bluetooth Flex Fuel Kit for the 2019+ 2.7L Turbo

If you're running E85 or ethanol mixes in your 2.7L Chevy Silverado, you need this kit!

Know your exact ethanol content in real-time via the Fuel-it! or JB4 app on your smartphone or tablet.

This is a complete plug and play kit to install a Bluetooth ethanol sensor in your 2.7L Chevrolet Silverado in about 15 minutes.

(Check compatibility for your platform below)

The kit includes the following:

• BMS 3/8" steel braided fuel line (straight & 90º billet fittings)
• Fuel-It! Bluetooth analyzer
• Genuine Continental® ethanol sensor
  
• Custom wiring harness
• Fuel-It! fuel line removal tool 
  
• 1 tube of SuperLube®

• Includes both Bluetooth App & 5v analog output for JB4 or flash tuning

  • Bluetooth (iPhone or Android app must be downloaded to use this feature)
  • If you are using an Apple device the app can be found by clicking here
  • If you are using an Android device the app can be found by clicking here
    
    

Vehicle Fitment

• 2019+ Chevy Silverado 2.7L Turbo
  

*For the Chevy JB4 platform connect the white wire to position #16 on the JB4 25 pin harness. Select WMI Ethanol Setup option 1 to enable pin location 15/16 flex fuel input.

*If you aren't sure whether this kit fits your vehicle, send us a picture of your engine bay with the engine cover removed to info@fuel-it.com

*Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated your ethanol readings may be artificially elevated.