BMS Oil Catch Can for B58 G05 X5 40i & G06 X6 40i BMW

  • $199.00
Shipping calculated at checkout.

SKU: G2x B48 OCC w/2x OCC screws, B58-X5-OCC hose, X5 OCC bracket

Keep Oil Out of your G Chassis B58 X5/X6 BMW Air Intake System!

It's no secret that turbo BMW motors can suffer from oil control problems causing the oil to blow through and coat the intercooler and charge piping, gunking up intake valves and the VANOS system, lowering the effective octane, and generally degrading engine performance. The higher your boost levels the more apparent these problems become.

The solution to this problem has finally arrived. The Burger Motorsports oil catch can. While there are other catch cans on the market they all fall short in various areas. Some are mounted on the hot/turbo side of the motor preventing proper vapor condensation. Others utilize hoses that are too small and runs that are too long to allow proper PCV ventilation causing internal motor/ring sealing issues. Some have insufficient or no internal baffle system while others have internal baffle systems that are too restrictive. Some even bypass the PCV system altogether venting crankcase gas and odor into the atmosphere. Most are simply repackaged oil catch cans from smaller/lower power motors shoehorned into place in the BMW engine bay.

To solve these problems Burger Motorsports designed their oil catch can kit from the ground up specifically for the turbo BMW application. It features 100% CNC machining with zero welding for a precision fit and long life. The can itself is guaranteed for the life of the vehicle. The hoses exceed the OEM PCV piping in diameter and that flow rate is maintained throughout the entire oil catch can ensuring no horsepower robbing crankcase pressure buildup. The BMS oil separator retains the factory fully closed loop PCV operation preventing any PCV vapor from leaking to the atmosphere. The mounting locations are selected to minimize the line length, allow more efficient operation, and retain a stealth look. Install takes around 10 minutes, includes all required hardware, and is 100% reversible. Simply unscrew the base of the can or use the drain plug to safely dispose of captured oil with the rest of your used motor oil during oil changes. Made in the USA.

⚠️ This BMS silicone intake hose is required to install and use this catch can.


• Increases Air Intake Efficiency
• Promotes Engine Longevity
• Non-Clogging Air Oil Separation Triple Baffle
• Free Flow Anti-Restriction Design
• Retains factory fully closed loop PCV operation
• Large Intake/Outlet No Tapering Down
• Stealth Mounting
• Anodized Black Aluminum
• Made in the USA & Guaranteed for Life

• Simply unscrew base every 3-6 months to empty or use the 1/8th NPT drain plug.
• Non-Clogging, No Service Needed Air/Oil Separation Triple Baffle
• High flow to eliminate crankcase pressure caused by more restrictive designs 
• Large 16mm+ inlet and outlet exceeds OEM PCV sizing
• Precision CNC Machined from Solid Blocks of High-Grade Aluminum

Vehicle Fitment 

B58 X5/X6 Vehicle Fitment 

• 2019+ G05 B58 X5 40i including xDrive
• 2021+ G05 X5 45e including xDrive
• 2020+ G06 B58 X6 40i xDrive


Can dimensions with lid: 4" (101.6mm) Tall
Can Diameter: 2.7" (68.5mm)
Lid Length: Back to nozzle end: 4" (101mm)
Nozzle Outer Diameter: .75" (19.2mm) 
Nozzle Inner Diameter:  0.669" (17mm) 
Can Capacity: 2.5 oz (74 ml)

What's Included

• (1) BMS G2x B48 Oil Catch Can
• (1) Billet 2 piece bracket with hardware
• (1) B58-X5-OCC heavy-duty silicone hose
• (2) Bracket to can screws M5x0.8x12mm internal hex

 Toyota Supra Wheel Spacers Install Guide BMS Burger Motorsports 10mm 13mm 15mm