BMS Water/Methanol Injection (WMI) Kit for Mercedes-Benz C63, C63S AMG

  • $ 799.00
Shipping calculated at checkout.

SKU: Full C63 WMI KIT - CLEAR 2g tank, billet cap, pump, solenoid, FSB, line, dual BM5 nozzles, C63 silicon nozzle adapters

Make tremendous amounts of power on pump gas!

Water/Methanol/Alcohol injection commonly referred to as WMI allow you to make tremendous amounts of power on pump gas. The effect is similar to running 100 octane race gas or E85 fuel all the time with the additional cooling benefits allowing for more power than you can make on race gas or E85 alone.

The key to a safe and effective Water/Methanol Injection (WMI) setup is tuning integration. The BMS methanol kit for Mercedes-Benz C63, C63S AMG integrates to the JB4 tuning system allowing for precise mapping based on boost, throttle position, engine speed, intake temperature, advance, gear, and other data elements available to the JB4 through its CANbus system. In addition a pump flow signal is fed back to the JB4 allowing for a safe and smooth progressive boost mapping. If the tank runs empty or flow drops for any reason the JB4 will safely back down performance to avoid detonation. Boost is held low until WMI is properly flowing to avoid tip in knock common with non-integrated WMI setups. In addition WMI can be activated or disabled right from the JB4 Mobile app , will automatically disengage during traction control or safety map situations, and WMI flow data can be displayed via your JB4 Mobile logging device.

The BMS Water/Methanol Injection (WMI) kit includes a high quality Aquatec WMI pump made to our specifications, high speed solenoid with leak-free compression fittings, a WMI filter, and all required wiring and mounting hardware. Also included is the BMS 2 gallon clear integrated tank which fits under the hood in the passenger side cowl compartment with the pump mounting directly to the tank.

A JB4 system is required for tuning and safety. Can be used with the factory flash map or any aftermarket flash map you choose. For those running aftermarket flash maps consult us on suggested WMI settings based on your specific tuning requirements.

Vehicle Fitment
• Mercedes-Benz C63/C63S 

What's included:

(1) FSB JB4 Water/Methanol Injection (WMI) Controller
(1) High speed solenoid with compression fittings
(1) WMI filter
(1) 2.5 gallon white/clear tank
(1) Blue Billet WMI tank cap w/safety check valve
(2) BM5 spray nozzles
(1) 20' Line
(2) Silicone hoses
(1) DDP 5800 water methanol alcohol Injection pump
(2) Billet NPT adapters
(2) Clamps
(2) 1/8NPT plugs
(2) 1/8MNPT to 1/4" compression fittings
(2) Street elbows 1/8NPT fittings
(1) 1/4" compression tee fitting

This full kit Includes a CLEAR 2g tank, billet cap, pump, solenoid, FSB, line, dual BM5 nozzles, C63 silicon nozzle adapters.

What's inside our methanol injection nozzles?

BMW Methanol Injection Nozzles by Burger Motorsports for JB4 integration


Silicone WMI Nozzle Adapters for Mercedes-Benz C63, C63s AMG
These silicon plug and play adapters allow you to install BMS WMI nozzles without having to drill out your intercoolers. Saves a ton of install time and is fully reversible. Kit includes dual BM5 nozzles. Made in the USA.


2 GALLON  LOW PROFILE TANK

Kit includes our 2 gallon universal tank the WMI pump mounts directly to the tank for the ultimate easy to install tank. This tank is compact allowing for a wide range of mounting on any horizontal surface in the trunk and can also be custom mounted under the hood on the C63 as shown.

Tank dimensions: L 15.5" x W 8" x H 8.25"

C63 Methanol injection kit with pump and nozzles

BMS Water Methanol Injection Kit for Mercedes-Benz C63, C63S AMG

Water Methanol Injection Tanks. Universal 2 Gallon Trunk Mount Tank with pump mount

 


Upgraded Billet WMI tank cap w/safety check valve

This high quality custom billet WMI cap includes an integrated check valve to let air in and prevent dangerous WMI vapor/fumes from getting out! Made in USA.


Customer Reviews

No reviews yet Write a review